INSULATION PRODUCTS
Technical data
Écobill MD/® PSE-R050
DATA SHEET
Product description
Ecobill MD® PSE-R050 (trade name) is an expanded polystyrene-injected thermal insulation (EPS-i) made from graffitied Type I and II EPS microbeads containing 50% recycled material. Eco-captation-certified raw materials of the highest quality. Injected (i) with an acrylic binder, it forms a rigid, stable, high-performance insulation in-situ in building attics. It dries and sets in just a few days. Ecobiil® EPS(i) offers unique, eco-friendly properties, ideal for existing buildings and new construction.
| INSULATION TYPE | Type I expanded polystyrene |
| ADHESIVE | Water-based acrylic binder. |
| COLOR | Greyish and/or white |
| BEAD SIZE | 0.5 to 2.5 mm |
| INSULATION STRUCTURE | Microcellular / non-hydrophilic |
| DENSITY | 15kg/m3 to 18kg/m3 |
| DIMENSIONAL STABILITY | No swelling, 98% stability |
| COMPATIBILITY | Wood, plastic, steel, concrete, plaster. |
| FLAMMABILITY | Yes, cover with flame-retardant material. |
| SELF-IGNITION | 400-500 C. |
| OPERATING TEMPERATURE | 75 C (max.) |
| NON-CAPILLARY | Does not retain water |
| HAZARDOUS | Dust- and vapour-free |
| VERMINE | Does not encourage vermin |
| MOLD | Does not promote mould |
Technical data
This insulation product surpasses the requirements of quality standard CAN/ULC-S701 (with modifications). Standards for rigid polystyrene insulation. Tests and test reports by independent laboratories recognized by the Canadian Construction Materials Centre.
| TECHNICAL DATA | METHOD | RESULT |
| THERMAL RESISTANCE | ASTM C518-10 | R- 3.9 /in |
| WATER ABSORPTION | ASTM D2842-12 | 0.6% @ 2% |
| WATER VAPOUR PERMEANCE | ASTM E96-00 | 1980 ng/Pa/s/m2 34.6 perms |
| AIR SHIELD | ASTM E2178 / AS01210-A | 75 Pa / +49 L/s-m2 |
| DENSITY | 15kg @ 18kg/m3 | |
| MOISISSURES | ASTM C1338-2014 | Pass |
| VOC | CDPH01350 – v 1.1 | Class-room / Pass |
| COMPRESSIVE STRENGTH AT 10% STRAIN (MIN.) | ASTM-D-1621 | 3@5 psi |
Injection processes
The wall is drilled
Holes are carefully cut to fill voids with a maximum radius of 20 inches (50cm).
We fill the wall with microbeads and binder
The injection gun stops automatically when maximum density is reached. This eliminates the risk of walls bursting.
The microbeads thread their way into gaps as small as 0.5 mm and coat everything in the partition.
Plugging injection holes
Ideally, fill the holes after injection to ensure that the insulation stays in place until completely dry.
The injected microbeads now form an insulator
Drying time can vary from 48 hours to 8 days, depending on the nature of the walls, the ambient temperature and humidity, and the thickness of the injected insulation.
INJECTION POSSIBILITIES
Building applications
Ecobill MD/® PSE-R050 can be injected into air gaps from 1 inch (2.5cm) to 16 inches (40 cm). In addition to its high thermal value, blown-in microbead insulation reduces infiltration and eliminates air movement.
- Walls and foundations
- Floors and ceilings
- Overhang
- Crawl space
MICROBEAD INJECTION
Advantages and benefits
PSE-i insulation is suitable:
- Wood
- Plaster
- Brick and concrete
- Metals
- Plastic and membrane
Material with low ecological impact
- Recycled material from Eco-capture
- Rated A+ for air quality.
- Contains no HCFCs or HFCs
- 100% recoverable and recyclable
- Does not contaminate materials in contact.
- Reduced ecological footprint and extended life cycle.
MICROBEAD INJECTION
Limit of use
- Expanded polystyrene beads (EPS) are flammable. PSE-i insulation must therefore be covered with a fire-retardant material as recommended in the national building code.
- Non-structuring, EPS-i can only be injected into empty spaces consisting of two walls.
- Adheres, but does not stick to surfaces.
- Not to be used in the presence of granular or fibrous materials (e.g. sawdust, cellulose, blown wool, vermiculite). Once mixed, they could contaminate or alter the EPS-i insulation.
- Not to be used in the presence of petroleum-based solvents or their fumes, which may affect the composition of the insulation.
- Insulation must not be subjected to pressure. Crumbly to the touch.
- Do not expose to direct sunlight, inclement weather or heat sources over 90C.
- Not to be used in the presence of water, moisture or mould, or on materials showing signs of deterioration.
- Does not replace a vapour-barrier system. Use a liquid vapour-barrier coating on the walls before painting.
Warranty
Ecobill MD/® EPS-R050 insulation meets the following standards and requirements: CAN/ULC-S701 (including modification). 10-year warranty*
Manufacturer
Inject-Styrene Technologie, Québec
1038 Iberville, St-Lambert de Lauzon (Qc), G0S-2W0
T : 581-777-3007
C : info@inject-styrene-technologie.ca
DISCLAIMER
The data and information contained in this document are presented in good faith and based on sources believed to be reliable. This document contains no representations or warranties, express or implied, as to the information, data and suggestions. Since provincial and municipal regulations may vary, and conditions of use may change over time and from place to place, it is the user’s responsibility to determine whether polystyrene microbead injection is appropriate for the intended use, according to the location and practices in compliance with current standards and regulations.